ARTECK PORTABLE CAR JUMP START
- A must have for every car! Make sure you and your loved ones can get home when stranded. It will jump start 4.2L gas or 3.0L diesel engine up to 22 times on a single charge.
- Powerful LED Light & Emergency Light; The ultra-bright LED flash light has 3 illumination modes, a flash light when you are in the dark, a strobe light to attract attention, and most importantly an SOS signal flash that will last up to 120 hours on a full charge for when you’re outdoors and in need of emergency help.
- Faster & Smarter Battery Charger; It is equipped with a 2.1A USB Output and smart USB port, with 13600 mAh capacity, you can charge your cellphones, tablets, kindles etc. at the fastest speed. You can also use it to charge your laptop with 8 in 1 laptop adapters (included in the package). The output voltage can be switched between 12V/16V/19V, indicated on the LCD screen.
- Convenient Package & Ultra Compact; Unlike traditional bulky jump starter packs, it’s small enough to store in your glove box and light enough to pack in your bag.
How To Use the device To Jump Start A Vehicle Battery
1. Make sure the battery capacity of the device is above 50%.
2. Plug the jumper cables into the barrel socket of the device and connect the jumper cable clamps to the drained battery of the vehicle.
WARNING: Always connect the BLACK clamp to the negative ( – ) terminal of the car battery first, then connect the RED clamp to the positive ( + ) terminal of the car battery. Do not touch the RED and BLACK cable clamps together or connect both cable clamps to the same piece of metal.
3. Now attempt to crank start the engine.
WARNING: If the engine does not start immediately on the first try, disconnect the jumper cables from the car battery and wait at least 10 seconds before reconnecting the jumper cables to the car battery.
4. Once the engine has successfully started, disconnect the jumper cable clamps immediately.
PLEASE KEEP AWAY FROM CHILDREN AT ALL TIMES